Err

Lever Handles

Ivory Porcelain Lever Handle On Rust Finish Rose X01-981Set

Base Material:  Porcelain handle, steel rose
Unit of Sale:  Set
Dimensions:  Handle 123mm Proj 60mm  Rose 48mm
Woodscrew fixings
X01-000 Cevenne Lock Lever Handles PatinePair

SPECIAL OFFER ITEM


This handle set is unsprung. A range of locks  that are suitable for unspung handles can be found in the Locks and Security section.

Unit of Sale:   1 Pair consisting of 2 handles and unsprung backplates with spindle and bolt through fixings
Base material is Steel 
Dimensions:  Overall the handle is 100mm long with a projection of 53mm.
The 8mm spindle is secured to the handle with a hex grub screw.   
The backplate is 310 x 32mm overall with fixing centres at 195mm.
Suitable for a door thickness of up to 48mm with adaption kits available for thicker doors.
X01-070 Cannonade Plain Latch Lever Handles PatinePair

SPECIAL OFFER ITEM



Unit of Sale:   1 Pair consisting of 2 handles and unsprung backplates with spindle and bolt through fixings
Base material: Steel
Unit of Sale:  Pair
Dimensions:  Overall handle is 114mm long with a projection of 70mm.  The backplate is 240 x 50mm overall with fixing centres at 165mm. 
Suitable for a door thickness of up to 48mm with adaption kits available for thicker doors.

This handle set is unsprung. A range of locks and latches that are suitable for both sprung and unspung handles can be found in the Lock & Security section.
X01-075 Cannonade Twist Latch Lever Handle PatinePair

SPECIAL OFFER ITEM


Base material: Steel
Unit of Sale: Pair consisting of 2 handles and unsprung backplates with spindle and bolt through fixings
Dimensions: Overall handle is 114mm long with a projection of 70mm. The backplate is 240 x 50mm overall with fixing centres at 165mm.
Suitable for a door thickness of up to 48mm with adaption kits available for thicker doors.

This handle set is unsprung. A range of locks and latches that are suitable for both sprung and unspung handles can be found in the Lock & Security section.

Lock pictured ( May not be available, please see below for options)
X01-474 Massena Lever on Plain Latch Plate PatinePair

Base Material: Steel
Unit of Sale: Pair
Dimensions: Backplate 195 x 40mm Handle 115 x 48mm proj
Woodscrew fixings

This handle set is unsprung. A range of locks and latches that are suitable for both sprung and unspung handles can be found in the Lock & Security section.
Euro Profile Pictured but only Latch available (No Keyhole)
X01-481 Decorative Latch Lever Handles PatinedPair

SPECIAL OFFER ITEM


Base Material: Mild Steel
Unit of Sale: Pair
Dimensions: Plate 245 x 45mm
Screw c/c : 165mm
Fixings: Male & Female Bolt through to suit upto 45mm Thick Door.
Longer fixings available upon request.

These door handle sets are Un-Sprung, so will need heavy sprung locks/latches to return the handles.
Alternatively you can order additional coil springs see 8000060 & 8000061.
X01-580 Picardie Style Latch Lever Handles PatinePair

This handle set is unsprung.  Suitable lock and latches can be found in the  Locks & Security section
Unit of Sale:   1 Pair 
Base material: Steel
Dimensions:  Handle O/A 120mm long,  projection  50mm.
Backplate  300 x 30mm 
Bolt through fixings
Suitable for a door thickness of up to 48mm 
X01-940 Castle Latch Lever Handle PatinePair

SPECIAL OFFER ITEM


Base Material: Steel
Unit of sale: Set
These handles are unsprung
Dimensions: Handle 114mm Proj 48mm Backplate 240 x 50mm
Bolt through fixings

These handle are unsprung. They will require a heavy sprung mortice latch or
alternatively you can add additional springing with coil springs 8000060 & 8000061